Measurement-computing CB-COM-7021 Manuel d'utilisateur télécharger pdf (Page 21)

CB-7021, CB-7022, CB-7024 User’s Manual

CB-7024 Current Output Calibration Sequence:

1. Connect meter to module’s voltage output channel 0.

2. Warm-Up for 30 minutes.

3. Setting type to 33. (−10 to 10V) -> Refer Sec. 2.1.

4. Output −10V. -> Refer Sec. 2.15.

5. Check the meter and trim the output for

−10V match by using trim command. -> Refer Sec. 2.18.

6. Perform −10V Calibration Command. -> Refer Sec. 2.16.

7. Program output for 10V. Refer Sec. 2.15.

8. Check the meter and trim the output for

10V match by using trim command.-> Refer

Sec. 2.18.

9. Perform 10V Calibration Command. -> Refer Sec. 2.17.

10. Repeat 1 to 9 for channel 1, 2 and 3.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Pas de commentaire

Measurement-computing CB-COM-7021 Manuel d'utilisateur Page 21