Measurement-computing CB-7080 Manuel d'utilisateur Page 50

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 74
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 49
CB-7080 & CB-7080D Counter/Timer User's Guide $AABS
2-32
$AABS
Description: Set input mode. Refer to "Counter/Frequency input mode selection".
Syntax: $AABS[chk](cr)
$ A delimiter character
AA 2-character HEX module address, from 00 to FF
B
S=0 channel 0 is non-isolated, channel 1 is non-isolated.
S=1 channel 0 is isolated, channel 1 is isolated.
S=2 channel 0 is non-isolated, channel 1 is isolated.
S=3 channel 0 is isolated, channel 1 is non-isolated.
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response:
Valid response !AA[chk](cr)
Invalid response ?AA[chk](cr)
no response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Examples:
Counter/frequency channel 0 is non-isolated, channel 1 is non-isolated:
command: $01B0(cr)
response: !01(cr)
Counter/frequency channel 0 is isolated, channel 1 is isolated:
command: $02B1(cr)
response: !02(cr)
Counter/frequency channel 0 is non-isolated, channel 1 is isolated:
command: $03B2(cr)
response: !03(cr)
Vue de la page 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

Commentaires sur ces manuels

Pas de commentaire