Measurement-computing WaveBook rev.5.3 Manuel d'utilisateur télécharger pdf (Page 121)

WaveBook User’s Manual – IO version 979194 Troubleshooting 7-13

How to check for the existence of a DHCP Server

1. Open the Control Panel by navigating from the Windows Desktop as follows:

Start Menu ⇒ Settings ⇒ Control Panel.

2. Double-click Network and Dial-up Connections icon.

3. Double-click the Network Connection icon for the network that the WaveBook/516E

[or WBK25] is connected to.

4. In the Local Area Connection Status box, click on the <Properties> button.

The Local Area Connection Properties box will appear.

5. Double-click the “Internet Protocol (TCP/IP)” component.

The Internet Protocol (TCP/IP) Properties box will appear.

6. Verify that the “Obtain an IP address automatically” radio button is selected.

7. Get the computer IP configuration settings using the ipconfig command.

8. Verify the DHCP Enabled value in the ipconfig output is set to “yes.”

9. Check the output of the ipconfig command for Lease Obtained and Lease

Expired lines. The presence of these lines indicates that there is a DHCP server on the

network. If this is the case, notify your network administrator and follow the instructions in

your network device documentation. The instructions should have a heading to the effect of:

Configuring a Device on a LAN with a DHCP Server.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 153 154

Pas de commentaire

Measurement-computing WaveBook rev.5.3 Manuel d'utilisateur Page 121