Measurement-computing Serial488A Manuel d'utilisateur télécharger pdf (Page 7)

1.5

Data Format: Selectable 7 or 8 data bits; 1 or 2 stop bits; odd, even, mark,

space and no parity on transmit.

Duplex: Full with Echo/No Echo.

Serial Control: Selectable CTS/RTS or XON/XOFF.

Terminators: Selectable CR, LF, LF-CR and CR-LF.

Connector: 25-pin Sub-D male. DCE Configured.

General

Terminal Installation Category:

Standard: Not Applicable

CE: Category 1 for all terminals.

Data Buffer: 32,000 characters dynamically allocated.

Indicators: LEDs for IEEE Talk and Listen, Serial Send and Receive, and

Power.

Power: An external power supply is provided with the Serial488A.

Input is 105 to 125VAC; 50 to 60 Hz, 10 VA Maximum.

Dimensions: 188mm deep x 140mm wide x 68mm high (7.39" x 5.5" x

2.68").

Weight: 1.55 kg. (3.6 lbs).

Operating Environment:

Standard: Indoor use, 0° to 50°C; 0 to 70% R.H. to 35°C.

Linearly derate 3% R.H./°C from 35° to 50°C.

CE: Indoor use at altitudes below 2000m, 0° to 40°C; 80% maximum

RH up to 31°C decreasing linearly 4% RH/°C to 40°C.

Controls: Power Switch (external), IEEE and Serial parameter switches

(internal). Jumper selection of RS-232 or RS-422 operation

(internal).

*Specifications subject to change without notice

1 2 3 4 5 6 7 8 9 10 11 12 ... 84 85

Pas de commentaire

Measurement-computing Serial488A Manuel d'utilisateur Page 7