Measurement-computing CB-COM-7012 Manuel d'utilisateur télécharger pdf (Page 44)

CB-7012, CB-7014, CB-7017 User’s Manual

2.21 @AAEAT

Description: Enable Alarm

Note: This command is for CB-7012/12D/12F/12FD/14D only.

Syntax: @AAEAT[CHK](cr)

@ Delimiter character

AA Address of receiving module (00 to FF)

EA Command to enable alarm.

T Alarm type, M=momentary alarm, L=latch alarm.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax or communication error may get no response.

! Delimiter for valid command

? Delimiter for invalid command

AA Address of responding module (00 to FF)

Example:

Command: @01EAM Receive: !01

Set Address 01 momentary alarm; return successful.

Related Command:

Sec. 2.19, @AADI; Sec. 2.24, @AADA; Sec. 2.25 @AACA

Related Topic:

Sec. 3.6, High/Low Alarm

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Pas de commentaire

Measurement-computing CB-COM-7012 Manuel d'utilisateur Page 44