Measurement-computing CB-7011 Manuel d'utilisateur télécharger pdf (Page 41)

CB-7011/CB-7011D, CB-7018 User’s Manual

2.20 ~AAEV

Description: Enable/Disable Calibration

Syntax: ~AAEV[CHK](cr)

~ delimiter character

AA address of setting module (00 to FF)

E command for enable/disable calibration

V 1=enable calibration, 0=disable calibration

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no

response.

! delimiter for valid command

? delimiter for invalid command

AA address of response module(00 to FF)

Example:

Command: $010 Receive: ?01

Perform address 01 span calibration, return it is not ready for

calibration.

Command: ~01E1 Receive: !01

Set address 01 to enable calibration, return success.

Command: $010 Receive: !01

Preform address 01 span calibration, return success.

Related Command:

$AA0 (Sec. 2.5), $AA1 (Sec. 2.6)

Pas de commentaire

Measurement-computing CB-7011 Manuel d'utilisateur Page 41