Measurement-computing CB-7011 Manuel d'utilisateur télécharger pdf (Page 39)

CB-7011/CB-7011D, CB-7018 User’s Manual

2.18 $AAZ(Data)

Description: Set LED Data

Note: The command is for CB-7011D/11PD only.

Syntax: $AAZ(Data)[CHK](cr)

$ delimiter character

AA address of setting module (00 to FF)

Z command for setting LED data

(Data) data for show on the LED, from -19999. to +19999. The

data need sign, 5 digits and decimal point.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no re-

sponse.

! delimiter for valid command

? delimiter for invalid command or LED not set to host

control

AA address of response module (00 to FF)

Example:

Command: $01Z+123.45 Receive: !01

Send address 01 LED data +123.45, return success.

Command: $02Z+512.34 Receive: ?02

Send address 02 LED data +512.34, return the LED is not

setting in the host mode.

Related Command:

$AA8 (Sec. 2.12), $AA8V (Sec. 2.13)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Pas de commentaire

Measurement-computing CB-7011 Manuel d'utilisateur Page 39