Measurement-computing CB-COM-7013 Manuel d'utilisateur télécharger pdf (Page 27)

CB-7013, CB-7033 User’s Manual

2.10 $AA8V

Description: Set LED Configuration

Note: This command is for CB-7013D/CB-7033D only.

Syntax: $AA8V[CHK](cr)

$ Delimiter character.

AA Address of setting module (00 to FF).

8 Command for set LED configuration.

V For CB-7013D, 1=Set LED to module, 2=Set LED to

host.

For CB-7033D, 0~2=Set LED to show channel 0~2

3=Set LED to host.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no

response.

! Delimiter for valid command.

? Delimiter for invalid command.

AA Address of response module (00 to FF).

Example:

Command: $0180 Receive: !01

Set address 01 LED to 0, return successful

Command: $0281 Receive: !02

Set address 02 LED to 1, return successful

Related Command:

Sec. 2.9 $AA8, Sec. 2.11 $AA9(Data)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Pas de commentaire

Measurement-computing CB-COM-7013 Manuel d'utilisateur Page 27