Measurement-computing CB-COM-7013 Manuel d'utilisateur télécharger pdf (Page 26)

CB-7013, CB-7033 User’s Manual

2.9 $AA8

Description: Read LED Configuration

Note: This command is for CB-7013D/CB-7033D only.

Syntax: $AA8[CHK](cr)

$ delimiter character

AA address of reading module (00 to FF)

8 command for set LED configuration

Response: Valid Command: !AAV[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no re-

sponse.

! Delimiter for valid command

? Delimiter for invalid command

AA Address of response module (00 to FF)

V LED configuration

For CB-7013D, 1=module control, 2=host control

For CB-7033D, 0~2=LED show channel 0~2,

3=LED is host control

Example:

Command: $018 Receive: !011

Read address 01 LED configuration, return 1.

Command: $028 Receive: !012

Read address 02 LED configuration, return 2

Related Command:

Sec. 2.10 $AA8V, Sec. 2.11 $AA9(Data)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Pas de commentaire

Measurement-computing CB-COM-7013 Manuel d'utilisateur Page 26