Measurement-computing CB-COM-7013 Manuel d'utilisateur télécharger pdf (Page 23)

CB-7013, CB-7033 User’s Manual

2.6 $AA1

Description: Perform Zero Calibration

Syntax: $AA1[CHK](cr)

$ Delimiter character.

AA Address of setting module (00 to FF)

1 Command for zero calibration.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no

response.

! Delimiter for valid command.

? Delimiter for invalid command.

AA Address of response module (00 to FF).

Example:

Command: $011 Receive: !01

Preform address 01 zero calibration, return successful.

Command: $021 Receive: ?02

When performing address 02 zero calibration, return was

not enabled before performing calibration command.

Related Command:

Sec2.5 $AA0, Sec. 2.15 ~AAEV

Related Topics:

Sec. 1.8 Calibration

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Pas de commentaire

Measurement-computing CB-COM-7013 Manuel d'utilisateur Page 23