Measurement-computing CB-COM-7013 Manuel d'utilisateur télécharger pdf (Page 32)

CB-7013, CB-7033 User’s Manual

2.15 ~AAEV

Description: Enable/Disable Calibration

Syntax: ~AAEV[CHK](cr)

~ Delimiter character

AA Address of setting module (00 to FF)

E Command for enable/disable calibration

V 1=Enable/0=Disable calibration

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no

response.

! Delimiter for valid command.

? Delimiter for invalid command.

AA Address of response module (00 to FF).

Example:

Command: $010 Receive: ?01

Perform addreess 01 span calibration, return not enable

calibration.

Command: ~01E1 Receive: !01

Set address 01 to enable calibration, returns successful.

Command: $010 Receive: !01

Preform address 01 span calibration, returns successful.

Related Command:

Sec. 2.5, $AA0; Sec. 2.6, $AA1

Related Topic:

Sec. 1.8, Calibration

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Pas de commentaire

Measurement-computing CB-COM-7013 Manuel d'utilisateur Page 32