Measurement-computing LogBook Series Manuel d'utilisateur télécharger pdf (Page 187)

LogBook User’s Manual, Appendix A 887997 Supplement / HopNet Modems A-3

Configure the “Serial Port Fixed Baud Rate Setup” for Device: LogBook Serial Fixed

1. From the LogBook Configuration Applet, click <Add Device>.

2. Set the Properties, via the LogBook Properties Tab, as follows:

Device Name: LogBook Serial Fixed

Connection Type: Serial Port (Fixed Baud)

Device Connection: COM1

Protocol: RS232

3. Set the Properties via the Port Settings Tab, as follows:

Bits per second: 19200

Flow control: Hardware

4. Click the <APPLY> button.

5. Click the <OK> button.

Configure the “Serial Port Fixed Baud Rate Setup” for Device: LogBook HopNet

1. From the LogBook Configuration Applet, click <Add Device>.

2. Set the Properties, via the LogBook Properties Tab, as follows:

Device Name: LogBook HopNet

Connection Type: Serial Port (Fixed Baud)

Device Connection: COM1

Protocol: RS232

3. Set the Properties via the Port Settings Tab, as follows:

Bits per second: 115200 (see Note 1)

Flow control: Hardware

4. Click the <APPLY> button.

5. Click the <OK> button.

Note 1: The bits per second, in step 3 above for device “LogBook HopNet” does not need to match the

bits per second set for device “LogBook Serial Fixed.”

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 221 222

Pas de commentaire

Measurement-computing LogBook Series Manuel d'utilisateur Page 187