Measurement-computing LogBook Series Manuel d'utilisateur télécharger pdf (Page 115)

LogBook User’s Manual 958896 Using Modems and the Upload Scheduler 7-13

Step Y.4 – Configure the PC’s Communication Parameters

1. Launch the Control Panel applet by navigating as follows from the Windows’ Desktop:

Start

⇒ Settings

⇒ Control Panel

⇒ LogBook Configuration

2. From the “Add New Hardware” dialog box, select

“Add Device.”

3. Select Serial Port from the Connection Type pull-

down list (following figure).

4. From the Device Connection pull-down list, select

the COMx, where x is the number of the serial

communication port that the modem will be using.

5. Click the Port Settings tab.

Adjusting Port Settings

6. In the Bits per Second field, select the baud rate of the LogBook and modems (see previous

figure).

7. In the Flow Control field, select None or Hardware, according to the following criteria:

• If using a cable with handshake lines, select None

• If your modems are not setup for hardware handshaking, select None

• All other instances, select Hardware.

8. Exit the LogBook Configuration control panel applet.

Step Y.5 – Validate the Connection

1. Launch LogView.

2. Select the newly configured LogBook as follows:

(a) Expand the Device pull-down menu (see following figure).

(b) Choose “Select LogBook.” A Select LogBook box will appear.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 221 222

Pas de commentaire

Measurement-computing LogBook Series Manuel d'utilisateur Page 115