Measurement-computing DaqView Manuel d'utilisateur télécharger pdf (Page 56)

Enhanced Counter Configuration

(Not part of the Counter/Timer Window. Enhance Counter Configuration applies only to 3000 Series Devices.)

If your Daq device supports enhanced counter configuration, for example, a DaqBoard/3000 Series device

or a Personal Daq/3000 Series device, you can use the “Enhanced Counter Configuration Settings” dialog

box [following figure] to independently set several parameters for each of four counters.

To access the “Enhanced Counter Configuration Settings” dialog box:

1. Open the Configure System Hardware dialog box.

2. Locate the “Advanced Features” panel at the lower left of the window.

3. Click on the <Counters> button.

A dialog box, Enhanced Counter Configuration Settings, will open as indicated in the

following figure.

Enhanced Counter Configurations Settings*

*This dialog box is not an aspect of the Counter/Timer Window. Instead, it is accessed from the Hardware

System Configuration dialog box when applicable to a device, e.g., DaqBoard/3000 Series and Personal

Daq/3000 Series devices.

Reference Notes:

o Manuals for the DaqBoard/3000 Series, USB DaqBoard/3000 Series, and Personal

Daq/3000 Series devices each provide detailed information regarding counter

functions.

o Should you desire to convert counter readings to engineering units, refer to

Appendix A, Converting Counter Readings to Engineering Units for 3000 Series

Devices.

9-2 Counter/Timer Window 907994 DaqView User’s Guide

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 85 86

Pas de commentaire

Measurement-computing DaqView Manuel d'utilisateur Page 56