
Specifications are subject to change without notice.
11-2 Specifications 958893 DaqBook/2000 and DaqOEM/2000 User’s Manual
Settling Time: 5 µs maximum to 1 LSB for full-scale step
Temperature Coefficient: ±(10ppm +
0.3 LSB)/°C outside the range of 0° to 30°C
Input Impedance: 10 MΩ for single-ended; 20 MΩ for differential
Bias Current: <
1nA at 0° to 30°C
Common Mode Rejection: 86 dB, DC to 60 Hz for gains <
8; >100 dB for gains >16
Maximum Input Voltage: +
11V relative to analog common
Over-Voltage Protection:
DaqBook/2001, DaqBook/2005: ±35V
Daq
OEM/2001, DaqOEM/2005: ±35V
DaqBook/2020: ±25V
Crosstalk: -100 dB DC to 60 Hz; 86 dB @ 10 kHz
Ranges: Softw
are programmable via sequencer on a per-channel basis.
Accuracy (Note 2)
One Year, 0 to 35°C
±(% reading + % range)
Input Noise (Note 3)
(LSB rms)
10 Hz to 200 kHz
Voltage Range
(Note 1)
Absolute Typical
0 to +10 V 0.015 + 0.005 1
0 to +5 V 0.015 + 0.005 1
0 to +2.5 V 0.015 + 0.005 1
0 to +1.25 V 0.015 + 0.008 2
0 to +0.625 V 0.015 + 0.008 2
0 to +0.3125 V 0.015 + 0.008 2
-10 to +10 V 0.015 + 0.005 1
-5 to +5 V 0.015 + 0.005 1
-2.5 to +2.5 V 0.015 + 0.005 1
-1.25 to +1.25 V 0.015 + 0.005 2
-0.625 to +0.625 V 0.015 + 0.008 2
-0.3125 to +0.3125 V 0.015 + 0.008 3
-0.156 to +0.156 V 0.020 + 0.008 3
Notes:
1) Specifications assume differential input single channel scan, 200 kHz scan rate, unfiltered.
2) Accuracy specification is exclusive of noise. Measurements w
ere taken at P1.
3) Inputs shorted to Signal Ground (SGND). 8192 samples.
Analog Input Specifications for DaqBook/2020 front panel BNC Connectors
Inputs: 5 µs maximum to 1 LSB for full-scale step
Maximum Voltage Range: ±10V
Input Impedance: 20 MΩ
Accuracy:
For Gains 1, 2: ± [0.1% of reading + 0.005% of range]
For Gains 4, 8, 16, 32, 64: ± [0.1% of reading + 250uV]
Total Harmonic Distortion: -84 dB (ty
p)
Signal to Noise and Distortion: 80 dB (ty
p)
Noise: 2 LSBRMS (ty
p)
Maximum Input Voltage (without damage): ±25 V
3 dB Bandwidth: 2.6 MHz
Temperature Coefficient: 10 ppm for every
°C outside the range of 0° to 50°C
Commentaires sur ces manuels