Measurement-computing DaqBook 2000 Series Manuel d'utilisateur télécharger pdf (Page 47)

STEP 3 – Connect the System Components

Reference Note:

For information regarding connections, refer to Chapter 4, Connectors, Indicators, Cables, & Pinouts.

What you will need to connect a DaqBook/2000 or DaqOEM/2000 Series device to the Ethernet

• An available connection to the Ethernet. The connection can be either

- an Ethernet jack on a computer or

- an Ethernet jack on a hub that is connected to the Ethernet.

• An Ethernet patch cable, e.g., a CA-242 (1.5 foot cable) or a CA-242-7 (7-foot cable).

1. Connect the Ethernet cable to the Ethernet jack on the DaqBook/2000 or DaqOEM/2000 Series

device, as applicable.

2. Connect the other end of the Ethernet cable to the Ethernet jack on the host computer or

network hub.

DaqBook/2000 and DaqOEM/2000 Series 898095 Configuring the System for Operation 6-5

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

Pas de commentaire

Measurement-computing DaqBook 2000 Series Manuel d'utilisateur Page 47