Measurement-computing DaqBook 2000 Series Manuel d'utilisateur télécharger pdf (Page 49)

STEP 5 – Configure the Computer’s Network Settings [Applies to “dedicated networks” only]

If using a LAN (Local Area Network), which has a DHCP server

, skip this section and continue

with STEP 7 - Configure and Test the System using the Daq*Configuration Applet (page 6-11).

If using a LAN (Local Area Network), which has no DHCP server

, skip this section and

continue with STEP 6 - Configure Device Network Settings using DaqIPConfig (page 6-10).

1. Open the Control Panel by navigating from the Windows Desktop as follows:

Start Menu ⇒ Settings ⇒ Control Panel.

2. Double-click the “Network and Dial-up Connections” icon.

3. Double-click the “Network Connection” icon for the network that the DaqBook device is connected to.

Local Area Connection Status

4. In the “Local Area Connection Status” box (previous figure), click on the <Properties> button.

The “Local Area Connection Properties” box will appear (following figure).

DaqBook/2000 and DaqOEM/2000 Series 898095 Configuring the System for Operation 6-7

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 89 90

Pas de commentaire

Measurement-computing DaqBook 2000 Series Manuel d'utilisateur Page 49