Measurement-computing WBK61 Manuel d'utilisateur télécharger pdf (Page 3)

WBK61 and WBK62, High-Voltage Adapters

988296

WBK61 and WBK62, pg. 3

3. If connecting only one WBK61/62, connect the green banana plug/alligator clip lead (CN-111) from

the WBK61/62 earth ground connector to the local earth ground.

If connecting two or more WBK61/62s, connect the green banana plug/alligator clip lead (CN-111)

from the last WBK61/62 earth ground connector to the local earth ground. Refer also to step 2 and the

above figure.

4. Connect the input leads (CA-152) to the WBK61/62 Input HI and Input LO jacks.

Connect the test leads (CA-152) to the circuit under test. You may use alligator clips (CN-109) to

connect test leads.

If desired, set the applicable WaveBook channel(s) to the appropriate scale by setting the mx+b function in

the WaveView program as discussed in the following section, Software Setup.

1 2 3 4 5 6

Pas de commentaire

Measurement-computing WBK61 Manuel d'utilisateur Page 3