Measurement-computing WBK40 Manuel d'utilisateur télécharger pdf (Page 14)

Software Setup

You will need to use the Daq* Configuration control panel applet to add the WBK40 or WBK41

device to the parent (first level) device, i.e., a WaveBook/516E or a WBK25 module. Refer to the

WBK40 & WBK41 Installation Guide (p/n 1066-0901). For convenience, a copy has been placed

after the specifications section of this document.

As this document goes to print there is no out-of-the-box software support for WBK40 and

WBK41 systems. At this early stage of the product cycle users must create their own custom

programs using API commands. These are covered in the Programmer’s Manual (p/n 1008-0901).

Refer to the ProgrammersManual.pdf

regarding API. The document is included on the Data

Acquisition CD and can be accessed via the <View PDF> button that appears on the CD’s opening

screen.

Operational Aspects

Block Diagrams

WBK41 Block Diagram

Digital I/O Expansion Port,

Connects to an Optional DBK20

Series Expansion Module,

or to 24 bits of Digital I/O

pg. 14, WBK40 & WBK41

926896

Thermocouple and Multifunctional Modules

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Pas de commentaire

Measurement-computing WBK40 Manuel d'utilisateur Page 14