Measurement-computing USB-202-OEM Manuel d'utilisateur télécharger pdf (Page 16)

USB-202-OEM User's Guide Specifications

Digital input/output

Table 8. Digital input specifications

Parameter Specification

Digital type TTL

Number of I/O 8

Configuration Each bit may be configured as input (power on default) or output

Pull-up configuration The port has 47 kΩ resistors that may be configured as pull-up or pull-down with

an internal jumper. The factory configuration is pull-down.

Digital I/O transfer rate

(system-paced)

33 to 4000 port reads/writes per second typical, system dependent

Input low voltage threshold 0.8 V max

Input high voltage threshold 2.0 V min

Input voltage limits 5.5 V absolute max

–0.5 V absolute min

0 V recommended min

Output high voltage 4.4 V min (IOH = –50 µA)

3.76 V min (IOH = –24 mA)

Output low voltage 0.1 V max (IOL = 50 µA)

0.44 V max (IOL = 24 mA)

Output current ±24 mA max

External digital trigger

Table 9. External digital trigger specifications

Parameter Specification

Trigger source TRIG input

Trigger mode Software configurable for edge or level sensitive, rising or falling edge, high or low

level. Power on default is edge sensitive, rising edge.

Trigger latency 1 µs + 1 pacer clock cycle max

Trigger pulse width 125 ns min

Input type Schmitt trigger, 47 kΩ pull-down to ground

Schmitt trigger hysteresis 1.01 V typ

0.6 V min

1.5 V max

Input high voltage threshold 2.43 V typ

1.9 V min

3.1 V max

Input low voltage threshold 1.42 V typ

1.0 V min

2.0 V max

Input voltage limits 5.5 V absolute max

–0.5 V absolute min

0 V recommended min

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire

Measurement-computing USB-202-OEM Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Measurement-computing USB-202-OEM