Measurement-computing USB-1616FS Manuel d'utilisateur Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 30
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
USB-1616FS User's Guide Specifications
26
Counter
Table 10. Counter specifications
Pin name
CTR
Counter type
Event counter
Number of channels
1
Input type
TTL, rising edge triggered
Resolution
32 bits
Counter/timer read/write rates; software paced
Counter read: system dependent, 33 reads to 1000 reads per second
Counter clear: system dependent, 33 reads to 1000 writes per second
Schmidt trigger hysteresis
20 mV to 100 mV
Input leakage current
± 1 µA
Maximum input frequency
1 MHz
High pulse width
500 ns min
Low pulse width
500 ns min
Input low voltage
1.0 V min, -0.5 V max
Input high voltage
4.0 V min, 5.5 V max
Memory
Table 11. Memory specifications
Data FIFO
32,768 samples, 65,536 bytes
EEPROM
1,024 bytes
EEPROM configuration
Address range
Access
Description
0x000-0x07F
Reserved
128 bytes system data
0x080-0x1FF
Read/Write
384 bytes calibration data
0x200-0x3FF
Read/Write
512 bytes user area
Microcontroller
Table 12. Microcontroller specifications
Type
High performance 8-bit RISC microcontroller
Program memory
16,384 words
Data memory
2,048 bytes
Power
Table 13. Power specifications
Parameter
Conditions
Specification
Supply current
USB enumeration
<100 mA
Supply current (Note 5)
Continuous mode
350 mA typ
User +5V output voltage range (Note 6)
Available at the 5V screw terminal
4.0 V min, 5.25 V max
User +5V output current (Note 7)
Available at the 5V screw terminal
50 mA max
Note 5: The total current requirement for the USB-1616FS which includes up to 10mA for the status LEDs.
Note 6: Output voltage range assumes input power supply voltage is within specified limits
Note 7: The total amount of current that can be sourced from the 5V screw terminal for general use. This
specification includes any additional contribution due to DIO loading.
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30

Commentaires sur ces manuels

Pas de commentaire