Measurement-computing PCI-DIO48H Manuel d'utilisateur télécharger pdf (Page 12)

PCI-DIO48H User's Guide Installing the PCI-DIO48H

Cabling

The red stripe

identifies pin # 1

50-pin Female

IDC connector

50-pin Female

IDC Connector

Figure 2. C50FF-x cable

Field wiring and signal termination accessories

You can use the following screw terminal boards to terminate field signals and route them into the PCI-DIO48H

using the C50FF-x cable.

 CIO-MINI50 – 50-pin screw terminal board.

 CIO-SPADE50 — 16" X 4" termination panel which mates with both 37-pin and 50-pin connectors.

 SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin

connections.

Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx.

 CIO-ERB24 – 24 Form C relays, 6 Amp relay accessory board for digital signal conditioning.

 CIO-SERB24/FD – 24 Form C relays, 10 Amp, fault detecting relay accessory board with socketed and

field-replaceable relays.

 CIO-ERB48 – 48 Form C relays, 6 Amp, relay, 50-pin accessory board for digital signal conditioning.

 CIO-SERB48 – 48 Form C relays, 10 Amp relay accessory board with socketed relays.

 SSR-RACK24 – 24-channel, solid-state relay mounting rack for digital signal conditioning.

 SSR-RACK48 – 48-channel, solid-state relay mounting rack with quad-format modules.

Details on these products are available on our web site at www.mccdaq.com/products/signal_conditioning.aspx.

For additional information about digital interfacing…

Detailed information regarding digital interfacing is contained in MCC's Guide to Signal Connections. This

document is available on our web site at www.measurementcomputing.com/signals/signals.pdf.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Measurement-computing PCI-DIO48H Manuel d'utilisateur Page 12