Measurement-computing Parallel488 Manuel d'utilisateur télécharger pdf (Page 13)

Section 2 Getting Started

2.1

Getting Started

2.1 Inspection

The Parallel488 was carefully inspected, both mechanically and electrically, prior

to shipment. When you receive the interface, carefully unpack all items from the

shipping carton and check for any obvious signs of physical damage which may have

occurred during shipment. Immediately report any damage found to the shipping agent.

Remember to retain all shipping materials in the event that shipment back to the factory

becomes necessary.

Every Parallel488 is shipped with the following....



Parallel488 Bus Converter Interface

138-0920 Instruction Manual

TR-2 Power Supply [110v] or

TR-2E Power Supply [220/230v]

Note: Other accessories ordered may be packaged and shipped separately.

2.2 Configuration

The Parallel488 has two modes of operation; as a parallel to IEEE 488 converter,

or as an IEEE 488 to parallel converter. A DIP switch internal to the Parallel488

determines which one of these modes the product will assume. Also selectable is the

automatic insertion of a line feed character after receipt of a carriage return, and the IEEE

address (for the IEEE to parallel mode only). On the following page are the Parallel488

factory default settings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 50 51

Pas de commentaire

Measurement-computing Parallel488 Manuel d'utilisateur Page 13