Measurement-computing IOtech 640 Series Manuel d'utilisateur télécharger pdf (Page 29)

640 & 650 Series 878893 Configuring Ethernet Models 640e & 650e 4-7

STEP 5 - Configure the Computer’s Network Settings [Applies to “dedicated networks” only]

The 640e and 650e Ethernet ports typically require 30 seconds after power-up to configure,

before the unit can be accessed via the network.

If using a LAN (Local Area Network), which has a DHCP server

, skip this section and continue

with STEP 7 - Configure and Test the System using the Daq Configuration Applet (page 4-11).

If using a LAN (Local Area Network), which has no DHCP server

, skip this section and

continue with STEP 6 - Configure Device Network Settings using DaqIPConfig (page 4-10).

1. Open the Control Panel by navigating from the Windows Desktop as follows:

Start Menu ⇒ Settings ⇒ Control Panel.

2. Double-click the “Network and Dial-up Connections” icon.

3. Double-click the “Network Connection” icon for the network that the 640e or 650e is connected to.

Local Area Connection Status

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Pas de commentaire

Measurement-computing IOtech 640 Series Manuel d'utilisateur Page 29