Measurement-computing Data Acquisition Systems rev.10.4 Manuel d'utilisateur Page 297
- Page / 366
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Programmer’s Manual 908594 Daq API Command Reference 4.6-19
Option Type and Value Definitions Continued--DaqOptionType
WBK17 Options (continued)
Option Type (optionType)
Description
Option Value
(optionValue)
Description
DcovWbk17ModeMaskGatingOff
DcotWbk17MeasurementMode
(continued)
Enumeration with
Bit-Masking.
The options can be
combined.
DcovWbk17ModeMaskGatingOn
Gating can be selected On or
Off. When “On”, the
counter is enabled when the
mapped channel to gate
the counter is high. When
the mapped channel is low,
the counter is disabled (but
holds the count value).
Option Type and Value Definitions Continued--DaqOptionType
WBK18 Options
Option Type (optionType)
Description
Option Value
(optionValue)
Description
DcovWbk18LowPassBypass Bypass the Low Pass Filter
for the specified WBK18
Channel
DcovWbk18LowPass_2_Pole Set the Low Pass Filter to 2-
Pole roll off for the specified
channel
DcotWbk18LowPassMode Configure Low Pass
input filter for Bypass,
2-Pole or 8-Pole on a
WBK18
DcovWbk18LowPass_8_Pole Sets the Low Pass Filter to 8-
Pole roll off for the specified
channel
DcovWbk18LPF_Cutoff_10Hz Sets the Low Pass input filter
to 10Hz for the specified
channel
DcovWbk18LPF_Cutoff_20Hz Sets the Low Pass input filter
to 20Hz for the specified
channel
DcovWbk18LPF_Cutoff_50Hz Sets the Low Pass input filter
to 50Hz for the specified
channel
DcovWbk18LPF_Cutoff_100Hz Sets the Low Pass input filter
to 100Hz for the specified
channel
DcovWbk18LPF_Cutoff_200Hz Sets the Low Pass input filter
to 200Hz for the specified
channel
DcovWbk18LPF_Cutoff_500Hz Sets the Low Pass input filter
to 500Hz for the specified
channel
DcovWbk18LPF_Cutoff_1000Hz Sets the Low Pass input filter
to 1000Hz for the specified
channel
DcovWbk18LPF_Cutoff_2000Hz Sets the Low Pass input filter
to 2000Hz for the specified
channel
DcovWbk18LPF_Cutoff_5000Hz Sets the Low Pass input filter
to 5000Hz for the specified
channel
DcovWbk18LPF_Cutoff_10000Hz Sets the Low Pass input filter
to 10000Hz for the specified
channel
DcovWbk18LPF_Cutoff_20000Hz Sets the Low Pass input filter
to 20000Hz for the specified
channel
DcotWbk18LowPassCutOff Sets the Low Pass input
filter cutoff frequency
for 2 pole or 8 pole
mode
DcovWbk18LPF_Cutoff_50000Hz Sets the Low Pass input filter
to 50000Hz for the specified
channel
- *372195A-01* 1
- How to use this Manual 3
- 908494 Programmer’s Manual 4
- Table of Contents 5
- Introduction 1 7
- Language Support 8
- Driver Installation 9
- 908494 Programmer’s Manual 10
- Data Acquisition Environment 11
- Signal Environment 12
- 988594 Programmer’s Manual 14
- For x% = 0 To 3 30
- 0, 0, x%, bitVal&) 30
- Next x% 30
- Zero Compensation 33
- Linear Conversion 35
- End Sub 36
- Using Multiple Devices 3 37
- Internal Clock Method 40
- Master Clock Method 41
- External Clock Method 43
- Overview 45
- 938395 Programmer’s Manual 46
- Mask and Flag Definitions 50
- 961 962 963 ... 999 59
- 941 942 ... 958 959 960 59
- Raw Data Formats 81
- Setting the Scan Rate 89
- Scan Rate Mode 89
- Scan Rate State 90
- Actual Scan Rate 90
- 94
- DBK16-Read Offset Trimpot 95
- DBK43-Read Offset Trimpot 96
- Typical flags Settings 100
- Settings 101
- Prototypes 102
- Program References 102
- Function Usage 104
- Visual BASIC 105
- Returns 114
- Data Transfer Progress 115
- Example Acquisition States 116
- DazcNone 124
- DazcAutoZero 124
- Parameter Type Description 129
- Definition Description 129
- Purpose 131
- Offset value to apply 142
- Parameter Values 144
- parameters 148
- Parameter Summary 150
- Parameter Type Definitions 150
- Moving Averages 160
- Definition Description 165
- Using Thermocouples (T/Cs) 172
- T/C Gains Settings 173
- Daq/2000 Series devices* 174
- Setting the Output Mode 184
- Buffer Management 201
- DAC0 DAC1 DAC2 DAC3 P3 DO 202
- DAC0 DAC2 P3 DO 202
- Note 1: 206
- Offset for header in bytes 208
- Update Cycle Data Blocks 211
- Update/Sample Data Format 212
- Output From File Operation 212
- DaqBoard/2000c Series 219
- Setting the DAC Value 227
- 908794 Programmer’s Manual 232
- (continued) 249
- DdiProtocolInfo 251
- DdiExtFeatures 251
- Local I/O 262
- Expansion I/O 262
- Local I/O 266
- 957193 Programmer’s Manual 280
- (for 14 sample settings 282
- 2, 4, 8, 16, 32, 64 282
- 128, etc. up to 16384) 282
- Option Value (optionValue) 284
- Counter Mode 285
- 908594 Programmer’s Manual 286
- Set the Excitation Source 289
- DmotWbk14ExcSrcApply 289
- Sets the Dac Offset 290
- Use DC coupling when 290
- Example: 291
- DcovWbk17Mode_Period 295
- DcovWbk17Mode_Pulsewidth 296
- DcovWbk17Mode_Timing 296
- DcovWbk17Mode_Encoder 296
- Setting the Trigger Level 306
- API Error Codes - daqError 319
- A2 - 162 331
- Programmer’s Manual 332
- Appendix A A 333
- 988294 Programmer’s Manual 334
- 939198 Programmer’s Manual 336
- Custom OEM Installation C 337
- WIN 9x/Me WIN NT/2000/XP 338
- WIN 9x/Me and 338
- WIN NT/2000/XP 338
- Installation Locations: 339
- 958293 Programmer’s Manual 340
- 938295 Programmer’s Manual 342
- Format 347
- Time-of-Day Configuration 356
- Glossary 359
- 986896 Programmer’s Manual 360
- 986896 Glossary G-3 361
- 986896 Glossary G-5 363
- 986896 Glossary G-7 365
Produits connexes et manuels pour Matériel Measurement-computing Data Acquisition Systems rev.10.4
(44 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels