Measurement-computing DigiCard/24 Manuel d'utilisateur télécharger pdf (Page 3)

290-0921, rev 1.0 Feb. 1998 DigiCard/24 User’s Manual Addendum

c. Select Data_Acquisition. The following text should appear: “IOtech DigiCard/24: PCMCIA Digital I/O

Card” as indicated in the above figure.

d. Double-click on the DigiCard/24 selection (from step 9c). Then click on the Resources tab. A screen image

similar to the following will appear.

10.

Record the I/O address assigned by Windows 95. This is the Input/Output range setting. In our example the

address is 0320 - 0327. You will need this information to run DigiView.

1 2 3 4

Pas de commentaire

Measurement-computing DigiCard/24 Manuel d'utilisateur Page 3