Measurement-computing WiFi-500 Sensor Series Manuel d'utilisateur télécharger pdf (Page 17)

WiFi-500 Sensor Series User's Guide Resetting a device out of an alarm state

Deleting device readings

To delete the readings currently stored on a device and on the host computer, right-click on a device and select

Delete Readings.

All readings for the selected device are deleted from device memory and from the host computer.

The device starts logging data again based on its settings.

Data that has been saved or exported to a file is not deleted from the file(s).

Resetting a device out of an alarm state

To reset a device that is currently in an alarm state, right-click the device image and select Reset Alarm.

The device returns to a normal, non-alarm state until the next alarm reading occurs.

Muting the audible alarm

The WiFi Sensor Software includes an audible alarm that sounds when a device is in an alarm state.

Click to turn alarm muting on and off.

Displaying device properties

To view the current logging and alarm settings for a selected device, along with the device type, firmware

version, MAC address, and the name of the connected WiFi network, click

Properties in the Existing devices

screen (refer to Figure 8 on page 13).

You can also right-click the device image and select

Device Properties from the context menu.

Figure 12: Device Properties popup window

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

Measurement-computing WiFi-500 Sensor Series Manuel d'utilisateur Page 17