Measurement-computing WaveBook rev.3.0 Manuel d'utilisateur télécharger pdf (Page 109)

WaveBook User’s Manual,

6-24-99

WaveView 5-15

WaveView Scope Window

Scope mode is a WaveView utility that can display data acquisition waveforms in real-time. Before this

mode can be enabled, at least one channel must be "ON." Up to eight channels can be displayed at a time.

Note: The following formula determines the maximum number of scans that can be stored for use in the

Scope mode. The formula does not apply to disk storage.

( Total Scans ) * ( # of Channels ) * 4 < Acquisition Buffer Size

WaveView Scope Button and Window

Item Description Item Description

1 Save 7 Zoom In

2 Acquire Continuously 8 Zoom Out

3 Acquire One Shot 9 Scale All Charts

4 Stop After Acquisition Complete 10 Toggle Cross Hairs

5 Stop Immediately 11 Toggle Grids

6 Manual Trigger 12 Open Configuration Window

To view additional channels in Scope Display, simply change the entry in the Number of

Charts selection of the Charts pull-down menu. You can simultaneously view up to eight

channels in Scope Display.

A Channel pull-down menu box is located at the right end of each chart and is used to select the desired

channel. Click on the box to display the channel list; then click on the desired channel.

The waveform display is actually a window looking at a section of the acquisition. The window size may be

increased or decreased and moved to any location on the time-line. The waveforms may be examined during

or after the acquisition.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 235 236

Pas de commentaire

Measurement-computing WaveBook rev.3.0 Manuel d'utilisateur Page 109