Measurement-computing SWITCH Manuel d'utilisateur télécharger pdf (Page 11)

Switch & Sense 8 User's Guide Template Installing the Switch & Sense 8

Unpacking the device

We recommend you install the software before connecting the Switch & Sense 8 to your computer.

As with any electronic device, you should take care while handling to avoid damage from static

electricity. Before removing the Switch & Sense 8 from its packaging, ground yourself using a wrist strap or by

simply touching the computer chassis or other grounded object to eliminate any stored static charge.

If any components are missing or damaged, notify Measurement Computing Corporation immediately by

phone, fax, or e-mail:

 Phone: 508-946-5100 and follow the instructions for reaching Tech Support.

 Fax: 508-946-9500 to the attention of Tech Support

Installing the software

To install the Switch & Sense 8 software, follow the steps below.

1. Close all applications you have running.

2. Insert the Switch & Sense 8 installation CD into your CD drive.

If you have the auto-run feature enabled on your computer, the main USB CD installation dialog opens.

If the auto-run feature is not enabled on your computer, use Explorer to navigate to the root of the CD

drive, and double-click on the program. The main USB CD dialog opens.

3. Click on the Install USB Support button

A splash screen appears momentarily on your display, followed by a Welcome… dialog.

4. Click on the Next button.

An Information dialog opens.

5. Read the information on this dialog, and then click on the Next button.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Pas de commentaire

Measurement-computing SWITCH Manuel d'utilisateur Page 11