Measurement-computing ScanServer rev.2.0 Manuel d'utilisateur télécharger pdf (Page 27)

ScanServer User's Guide Using RSView32 6.0 with ScanServer and OPC 25

Using Microsoft Excel with ScanServer

Procedures

Start Microsoft Excel.

Note: In Excel, DDE information must be entered in the following format:

=application|topicname!item

Enter the following in any empty cell:

=ScanServer|ts1!last1

where ts1 is the node name you entered when you created the node.

Press ENTER. Data from channel 1 should be displayed as an alphanumeric

string in the cell.

Now create an array by selecting six adjacent cells in any column.

Note: In Excel, arrays of DDE information must be entered by selecting the same

number of cells as channels to be read, entering =application|topicname!’item’,

and then pressing CTRL-SHIFT_ENTER to execute the command.

Type the following :

=ScanServer|ts1!’last1-4’

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Pas de commentaire

Measurement-computing ScanServer rev.2.0 Manuel d'utilisateur Page 27