Measurement-computing PointScan 300 Series rev.1.0 Manuel d'utilisateur télécharger pdf (Page 13)

PointScan/300 User’s Manual 8-23-01 Assembly and Installation 2-1

Assembly and Installation 2

PointScan/300 Series Panel Assembly

PointScan/300 Series I/O snaps onto DIN rail strips fastened to the subpanel. Figure 2-4 shows a sample

panel with DIN rail strips and wire duct attached. Recommended DIN rail spacing is 8 inches. This spacing

allows room for wire duct to be installed without obstructing field wiring installation.

The PointScan/300 Series modules are typically installed against one another, but space may be left

between modules to accommodate other DIN rail mounted components such as terminal blocks and fuse

holders. End clamps are recommended to restrict side-to-side movement. Figures 2-5 through 2-7 show the

physical dimensions of the PointScan/300 Series components.

PointScan/300 Series modules may be installed in any orientation and order on your panel. The modules

are electrically interconnected using PT-Bus wiring, beginning with the gateway. Refer to Section 3 for

more information on PT-Bus wiring.

Sample Layout For a 36” x 30” Enclosure

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Pas de commentaire

Measurement-computing PointScan 300 Series rev.1.0 Manuel d'utilisateur Page 13