Measurement-computing PointScan 200 Series rev.1.0 Manuel d'utilisateur télécharger pdf (Page 7)

PointScan/200 User’s Manual

9-25-01

General Information 1-1

General Information 1

Overview

This manual will help you install and maintain PointScan/200. In summary, wiring for power,

communications and I/O is connected to each module’s base. Then, setup choices are entered using the

IO Toolkit and the system is ready to run.

General Specifications

These general specifications apply to all PointScan/200 modules.

Supply Voltage 9 - 30 VDC, 0.5 Watt typical per module

(25 mA @ 24 VDC – varies by module and load).

Modules per RS485 bus 32 (use a PointScan/441 to drive a total of 128 modules)

RS485 Isolation 1200 Volts RMS (for 1 minute)

Operating Temperature

-30 to 70

Storage Temperature

-40 to 85

Humidity 5 to 95% (non-condensing)

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Pas de commentaire

Measurement-computing PointScan 200 Series rev.1.0 Manuel d'utilisateur Page 7