Measurement-computing PointScan 100 Series rev.1.0 Manuel d'utilisateur télécharger pdf (Page 7)

PointScan/100 User’s Manual

9-12-01

General Information 1-1

General Information 1

Overview

This manual will help you install and maintain PointScan/100 I/O modules. In summary, wiring for power,

communications and I/O is connected to each module’s base. Then, setup choices are entered using the

IO Toolkit software and the system will be ready to run. Shown below are some typical system

configurations using PointScan/100 I/O:

Using Ethernet based PointScan/100 I/O with (RS485) PointScan/200 expansion I/O

General Specifications

These general specifications apply to all PointScan/100 I/O modules. More detailed product specifications

may be found in the online help system of the IO Toolkit configuration software.

Supply Voltage

10 - 30 VDC, 1.2 Watt typical per module

(48 mA @ 24 VDC – varies by module and load).

RS485 Expansion

Connect up to 32 PointScan/200 modules or Modbus

devices using RS485

Ethernet Isolation 1200 Volts RMS (for 1 minute)

Operating Temperature

-30 to 70

Storage Temperature

-40 to 85

Humidity 5 to 95% (non-condensing)

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Measurement-computing PointScan 100 Series rev.1.0 Manuel d'utilisateur Page 7