Measurement-computing PC-CARD-DAC08 Manuel d'utilisateur télécharger pdf (Page 17)

PC-CARD-DAC08 User's Guide Specifications

Typical accuracy is derived directly from the various component typical errors. This typical error calculation

for a SW calibrated PC-CARD-DAC08 yields ±1.8 LSB. However, this again assumes that each of the errors

contributes in the same direction and the ±1.8 LSB specification is quite conservative.

Digital input / output

Table 4. DIO specifications

Digital type FPGA

Configuration Two ports, four bits each. Programmable as eight input, eight output, or four input

and four output

Input low voltage 0.8 V max

Input high voltage 2.0 V min

Output low voltage (IOL = 4 mA) 0.23 V max

Output high voltage (IOH = –4 mA) 3.86 V min

Absolute maximum input voltage –0.5 V , +5.5 V

Power-up / reset state Input mode (high impedance)

Interrupt enable Programmable

Interrupt source External (EXTERNAL INTERRUPT), falling edge triggered

Power consumption

Table 5. Power consumption specifications

+5 V quiescent

Normal operation 42 mA typical, 110 mA max

CIS read 57 mA typical, 135 mA max

Environmental

Table 6. Environmental specifications

Operating temperature range

0 to 70 °C

Storage temperature range -40 to 100 °C

Humidity 0 to 95% non-condensing

Mechanical

Table 7. Mechanical specifications

Card dimensions PCMCIA type II: 85.6 mm (L) x 54.0 mm (W) x 5.0 mm (H)

Connector and pin out

Table 8. Connector specifications

Connector type Honda 26-pin mini D-type

Connector compatibility Translates to 37D pin out using PC-CARD-C37F/26

Compatible accessory

products

CIO-MINI37

SCB-37

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Measurement-computing PC-CARD-DAC08 Manuel d'utilisateur Page 17