Measurement-computing E-1608 Manuel d'utilisateur télécharger pdf (Page 25)

E-1608 User's Guide Specifications

Power

Table 15. Power specifications

Parameter

Condition

Specification

External power supply

5V, 1A

Supply current

Quiescent current

330 mA typical (Note 6)

710 mA max including all external loading

User output voltage range

Available at +VO terminal

4.40 V min to 5.25 V max, assumes supplied

AC adapter is used

User output current

Available at +VO terminal

10 mA max

Note 6: This is the total quiescent current requirement for the device that includes the LEDs. This does not

include any potential loading of the digital I/O bits, +VO terminal, or the AOUTx outputs.

Network

Ethernet connection

Table 16. Ethernet connection specifications

Parameter

Specification

Ethernet type

100 Base-TX

10 Base-T

Communication rates

10/100 Mbps, auto-negotiated

Connector

RJ-45, 8 position

Cable length

100 meters max

Additional parameters

HP Auto-MDIX support

Network interface

Table 17. Factory default specifications

Parameter

Specification

Protocols used

TCP/IP (IPv4 only), UDP

Network ports used

UDP:54211 (discovery)

UDP:6234 (bootloader only)

TCP:54211 (commands)

TCP:54212 (scan data)

Network IP configuration

DHCP + link-local, DHCP, static, link-local

Network name

E-1608-xxxxxx, where xxxxxx are the lower 6 digits of the device MAC address

Network name publication

By NBNS (responds to b-node broadcasts, therefore only available on the local

subnet)

1 2 ... 20 21 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire

Measurement-computing E-1608 Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Measurement-computing E-1608