Measurement-computing DaqBook 2000 Series Installation Manuel d'utilisateur télécharger pdf (Page 27)

Appendix D

977296

Device Connector Reference D-1

Appendix D – Device Connector Reference D

For DaqBook/2000 Series Devices

DaqBook/2000A …… D-1

DaqBook/2000X …… D-3

DaqBook/2000E …… D-5

DaqBook/2000A

Front Panel

The DaqBook/2000A’s front panel offers three DB37 connectors designated as P1, P2, and P3.

P1 connects to Analog I/O.

P2 connects to Digital I/O.

P3 connects to Pulse / Frequency Digital I/O.

The

DaqBook/2000 Series User’s Manual

(p/n 1103-0901) includes pinouts for each.

Rear Panel

DaqBook/2000A’s rear panel contains a power switch, DIN5 power connector, LEDs, synchronization

ports, a parallel port connector, and a 100-pin (P4) connector. Additional detail follows. Items

described below are done so from left to right, when looking at the rear panel.

POWER Switch: A rocker-type switch with a “0” label for Power Off, and a “1” for Power On.

POWER IN: +10 to +30 VDC, through a socket type DIN5 connector on the chassis.

Power is typically supplied from a TR40U power adapter.

LEDs: ACTIVE – Lights when a sample has been converted by the A/D Converter.

ONLINE – Lights when software establishes communication to the unit.

POWER

– Lights when power is turned on and is present.

SYNC (Qty of 2) – Two “synchronization ports” provide a means of synchronizing multiple

DaqBook/2000 Series units in regard to post-trigger scanning. The ports accept CA-74-1 and CA-74-5

RJ-11, 6 conductor type cables.

Parallel Port – A DB25 connector used to connect theDaqBook/2000A to the Parallel Port of the host

PC, or to an Expansion Port of a DaqBook/2000E, or to an Expansion Port of a WBK25 Ethernet

Interface Module. Applicable cables are CA-35-2 (2-foot) and CA-35-12 (1-foot).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Pas de commentaire

Measurement-computing DaqBook 2000 Series Installation Manuel d'utilisateur Page 27