Measurement-computing CIO-DO48H Manuel d'utilisateur télécharger pdf (Page 10)

4.4 CONNECTOR DIAGRAM AND REGISTER

ASSIGNMENTS

The CIO-DOxxH user connector is one to four 50-pin header-type connectors

accessible from the rear of the PC through the expansion backplate. The signals

available are direct connections to a digital buffer chip.

The connector accepts female 50-pin header type connectors, such as those on the

C50FF-2, a 2-foot cable with female connectors.

Figure 4-1. User Connector Pinout and Register Assignments

Figure 4-1 shows the register assignments for the outputs of all three board versions.

If frequent changes to signal connections or signal conditioning is required, please

refer to the information on the CIO-TERM100, CIO-SPADE50 and CIO-MINI50

screw terminal boards.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Measurement-computing CIO-DO48H Manuel d'utilisateur Page 10