Measurement-computing CB-NAP-7000D Manuel d'utilisateur télécharger pdf (Page 18)

NAP7000D User Manual (Version 1.0) ---- 18

Step 2: Select the desired module type as method 1 or method 2. In this case, please

select 7012 as fig 2-10 shown.

Fig 2-10 select the desired module.

If selecting 7012/D by method 1 then the following step3, step4 and step 5 is

necessary. If using method 2 then skip step3, step4 and step5.

Step 3: Entry the module address for the selected module. In this case, please enter

Step 4: Select the exact baud rate in the Baud Rate Combo for the selected module.

In this case, please select 9600.

Step 5: Select the status of checksum(Disable or Enable) for your CB-7012D.

Notice, the status of checksum must be exact to your physical CB-7012D module

device. If you select Enable, you must to enable checksum status for CB-7012D. The

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Pas de commentaire

Measurement-computing CB-NAP-7000D Manuel d'utilisateur Page 18