Measurement-computing PC104-CTR10HD Manuel d'utilisateur télécharger pdf (Page 8)

2.4 INSTALLING THE BOARD

1. Turn the power off.

2. Push the board firmly down into the expansion bus connector. If it is not

seated fully it may fail to work.

3. The connector is a 50-pin header type connector (Figure 2-2). All the signals

from the 9513 and interrupt are accessible.

4. Cables C50FF-2 and the CIO-MINI50 allow easy connection to all of the

counter signals through 12-22 AWG screw terminals.

Figure 2-2. 50-Pin Connector

Counters associated

with #2 9513 (chip U2)

Counters associated

with #1 9513 (chip U1)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Measurement-computing PC104-CTR10HD Manuel d'utilisateur Page 8