Measurement-computing CB-NAP-7000D Manuel d'utilisateur télécharger pdf (Page 23)

NAP7000D User Manual (Version 1.0) ---- 23

Step 4: Entry the module address for the selected module.

Step 5: Select the exact baud rate in the Baud Rate Combo for the selected module.

Step 6: Select the status of checksum(Disable or Enable). Notice, the status of

checksum must be exact to your physical CB-7000 series module device. If you

select Enable, you must to enable checksum status for CB-7000 module. The default

setting for CB-7000 series module is disable.

After above six steps, the setting window shown as Fig 2-15.

Fig 2-15 After setting the module configuration.

Step 7: when Fig 2-15 display, click OK button to accept the setting.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Pas de commentaire

Measurement-computing CB-NAP-7000D Manuel d'utilisateur Page 23