Measurement-computing RS232 to USB Interface Manuel d'utilisateur télécharger pdf

446-0941 rev 1.0

RS-232 to USB Interface Adapter Kit Quick Start

For use with ChartScan/1400, MultiScan/1200 , TempSan/1100 , LogBook/300, and LogBook/360.

This USB Interface option allows you to connect an applicable acquisition device to a USB port on the host PC instead of

connecting it to an RS-232 interface. The kit includes all the items you will need for proper connection.

Your kit contains 1 each, of the following:

• CA-47 null modem serial cable

• CA-271 RS-232 to USB interface cable

• Data Acquisition CD 8.1.2 (or higher) IMPORTANT! Software must be installed first!

• Quick Start (446-0941)

Before you get started

Verify that you have the following items.

• Data Acquisition Device

• RS-232 to USB Interface Adapter Kit

• Monitor: SVGA, 1024 x 768 screen resolution

• Windows XP users

•

PC with Intel

™

Pentium [or equivalent]; 1GHz

512 MB memory; 10 GB disk space

Windows Vista users:

PC must be Windows Vista Premium Ready

Step 1 - Install Software (Software must be installed before connecting hardware)

1. Close all running applications on the host PC.

2. Insert the Data Acquisition CD (8.1.2 or higher) into your CD-ROM drive and wait for the PC to auto-run. An Opening

Screen will appear. If AutoRun is disabled: (a) right click Windows Start menu, (b) select Explore; and (c) double-click

MasterSetup.exe. As an alternative to using the CD, you can download software from

3. Click the <ENTER SETUP> button.

Note: If you are downloading software from our website, follow instructions provided there.

www.mccdaq.com/software.

4. F

rom the hardware selection screen, s

elect your data acquisition device then follow the on-screen instructions.

Note - ChartView Users:

ChartView is used with ChatScan/1400, TempScan/1100, and MultiScan/1200.

To enable all ChartView features:

(a) From ChartView’s main window, open the File pull-down menu,

(b) select Authorization,

Note - LogView Users

LogView is used with LogBook/300 and LogBook/360.

To enable all LogView features:

(a) From LogView’s main window, open the File pull-down menu,

(b) select Authorization,

Step 2 – Check Hardware

Refer to the manual and/or quick start for your specific device.

1. If your device has a voltage stated [near the power switch], make sure it matches the voltage of your intended AC power

supply. If you need to change the voltage, refer to your user’s manual.

2. If your device has a DIP switch refer to your users’ manual for the setting options.

Step 3 - Connect to the Host PC

Note: To check the host PC’s COM port status, navigate from the Windows Desktop as follows:

Control Panel ⇒ System ⇒ Device Manager tab, then click on Ports (COM & LPT).

1 2

446-0941 rev 1.0 1
*325028A-01* 2

Résumé du contenu

Page 1 - 446-0941 rev 1.0

446-0941 rev 1.0 RS-232 to USB Interface Adapter Kit Quick Start For use with ChartScan/1400, MultiScan/1200 , TempSan/1100 , Lo

Page 2 - *325028A-01*

*325028A-01* 325028A-01 Measurement Computing, 10 Commerce Way, Norton, MA 02766 phone: (508) 946-5100; email: [email protected]; www.mccdaq.com

Commentaires sur ces manuels

Pas de commentaire

Measurement-computing RS232 to USB Interface Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Measurement-computing RS232 to USB Interface. Measurement Computing RS232 to USB Interface User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Measurement-computing RS232 to USB Interface