Measurement-computing 2000 Series Daqboar Manuel d'utilisateur télécharger pdf (Page 38)

1-12 Daq Systems and Device Overviews

10-18-02

DaqBoard/2000 Series & /2000c Series User’s Manual

DaqBoard/2001 Block Diagram*

* The DaqBoard/2001c Block Diagram is the same, with exception that the /2001c board uses a

compact-PCI Bus instead of a standard PCI bus.

Connections

Installation

Reference Note: For the DaqBoard/2001 and /2001c installation procedure, refer to either the

DaqBoard/2000 Series Installation Guide or to the DaqBoard/2000c Series Installation

Guide, as applicable. The guides are included at the beginning of this manual.

I/O Connector

All input and output signals are available at the board’s 100-pin P4 connector. A 3-foot, 100-conductor

ribbon cable, part number CA-195, mates with connector P4.

Reference Note: There are several P4-connector board options available for connecting the

100 pins of P4 to typical DB37 connectors (P1, P2, and P3). In addition to being briefly

discussed in chapter 2 of this manual, these options, referred to as DBK200 Series, are

detailed in the DBK Cards and Modules User’s Manual (p/n 457-0905).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 93 94

Pas de commentaire

Measurement-computing 2000 Series Daqboar Manuel d'utilisateur Page 38